16 Row Engine Oil Cooler Kit Male Plate For BILLET LS1 LS2 LS3 LSX VE HSV

 

Fit for LS1 LS2 LS3

 

 

Has 2 male AN10 (Dash-10) ports for the cooler lines

It is machined from a single piece of 6061-T6 aluminum and is black anodized

Designed to allow access to the oil system on the modern range of GM V8 engines as an alternative to a sandwich plate that will result in the oil filter being exposed below the base of the engine sump. This will then allow connection to an oil cooler. In addition it has two 1/8 NPT ports that allow for the fitting of temperature or pressure sensors and installing an oil take off for turbo or superchargers etc (no thermostat). It should be noted that any oil take off must be regulated or restricted either in line or at the application.

 

 

Same as on the picture

 

 

Made of High Quality Lightweight Aluminum with CNC Laser Cut

Allows Installation of Larger Oil Filter

Increases Engine Oil Capacity Available; thus, Enhances Oil Lubrication and Protection of Engines

Oil Filter Relocation for Easier Access, a Must for Hard-To-Reach Oil Filters